Mode Conditioning Duplex Patchcable for Gigabit EtUrnet, 2 x ST 62.5/125µ to 1 x LC 62.5/125µ and 1 x LC 9/125µ
Mode Conditioning cable ST Duplex onto LC 62,5/125µ + LC 9/125µ,3m
Item number:
O6370.3
EAN no.:
4049759057626
Product information for Mode Conditioning cable ST Duplex onto LC 62,5/125µ + LC 9/125µ,3m
These specially designed patch cables have a single-mode cable spliced to a multimode patch cable with a definded core excentricity.
This has the effect that the laser spot is not focused on to the DMD-susceptible core centre, but onto the DMD-insensitive core edge area of the Multimode fiber.
Mode-Conditioning jumper are used at both ends of the fiber optical link. The singlemode end of the first jumper ist connected with the transwith port (TX) at the begin
and the second singlemode end with the transwith port (TX) at the end of the link.
Application is to optimize multimode links and extend the length-restriction for Gigabit Ethernet 1000BaseLX (1300nm).
In the window „850nm“ singlemode fibers are undefined, so Mode-Conditioning is not possible for Ethernet protocol 1000BaseSX.
IEEE802.3z Gigabit Ethernet 1000BaseLX
Allows full Gigabit Ethernet link distance
Reduces Differential Mode Delay (DMD)
Low insertion loss
Usable for patching active components to the passive network instead of standard duplex jumpers
This has the effect that the laser spot is not focused on to the DMD-susceptible core centre, but onto the DMD-insensitive core edge area of the Multimode fiber.
Mode-Conditioning jumper are used at both ends of the fiber optical link. The singlemode end of the first jumper ist connected with the transwith port (TX) at the begin
and the second singlemode end with the transwith port (TX) at the end of the link.
Application is to optimize multimode links and extend the length-restriction for Gigabit Ethernet 1000BaseLX (1300nm).
In the window „850nm“ singlemode fibers are undefined, so Mode-Conditioning is not possible for Ethernet protocol 1000BaseSX.
IEEE802.3z Gigabit Ethernet 1000BaseLX
Allows full Gigabit Ethernet link distance
Reduces Differential Mode Delay (DMD)
Low insertion loss
Usable for patching active components to the passive network instead of standard duplex jumpers
Technical properties
| APC version: | False |
|---|---|
| Anti-kink sleeve: | put-on |
| Cable Conform to Standard: | IEC 60793-2 |
| Cable Construction: | Duplex |
| Cable type: | I-V(ZN) H |
| Category: | OM1 |
| Colour outer sheath: | orange |
| Connector colour 1: | beige |
| Fibre type: | Multi mode 62.5/125 |
| Flame retardant: | According to EN 50265-2-1 |
| Halogen free (according to EN 50267-2-3): | True |
| Jacket Material: | LSZH |
| Number of fibres: | 2 |
| Operating Temperature: | -20 – 75 °C |
| Side 2A: | 1 x LC 62.5/125µ |
| Side 2B: | 1 x LC 9/125µ |
| Side A: | 2 x ST 62.5/125µ |
| Storage Temperature: | -20 – 85 °C |
| Type of connector connection 1: | LC-Duplex |
| Type of connector connection 2: | ST |
